建國科技大學 自動化工程系暨機電光系統研究所 教授兼主任暨所長

學校經歷

1. 國立中山大學 / 海洋生物科技暨資源學系/生物組 (博士, 1998-06 ~ 2006-07)
2. 國立中興大學 / 生物產業機電學系 (碩士, 1996-06 ~ 1998-07)

工作經歷

1. 順立智能科技有限公司 / 技術顧問 (2018-01 ~ 2018-01, 兼職)
2. 順成生物科技股份有限公司 / 技術顧問 (2011-01 ~ 2018-01, 兼職)
3. 美國堪薩斯州立大學 / 生物部門研究 (2009-01 ~ 2009-01)
4. 美國北卡大學 / 訪問學者 (2009-01 ~ 2009-01)

個人著作

1.	Feng-Che Tsai, Shie-Chen Yang, Tsuo-Fei Mao, Hsi-Chuan Huang, "Tsung-Lun Li, Feasibility study of micro-hole wall grinding by icro -elastic abrasive particles," Key Engineering Materials Vol. 642, Jan, 2015.
2.	W.H. Kao, Y. L. Su, J.H. Horng, H.C. Huang, "The deposition rate, hardness and tribological properties of a-C:H coatings with a tungsten filament-assisted ionized reaction gas," Key Engineering Materials Vol. 642, Jan, 2015.
3.	Wen-Hsien Kao, Yean-Liang Su, Jeng-Haur Horng, S. H. Yao, H.C. Huang, "Application of taguchi method to the optimization of a-C:H coatings deposited using ion beam assisted physical vapor deposition," Advances in Mechanical Engineering, Jan, 2014.
4.	W. H. Kao, Y. L. Su, J. H. Horng, S. H. Yao, H. C. Huang, "The tribological properties of Zr/a-C:Zr/Zr-C:H-x films with various ulsed-direct current power frequency sliding against various normal loading," The 2nd Global conference on materials science and engineering, Jan, 2013.
5.	H.C. Huang,W.H. Kao,T.S. Wei,S.Y. Liu,Y. S. Syu,P.D. Liu, "Development of Active Rehabilitation Device of Hand Joint," Advanced Materials Research Vols, Nov, 2012.
6.	W.H. Kao, Y.L. Su, S.H. Yao, H.C. Huang, M. S. Chen, "The Study of High Speed Micro-drilling Performance and Machining Quality of Coated Micro-drills with Zr-C:H Coatings," Advanced Materials Research Vols, Oct, 2012.
7.	H.C. Huang,W.H. Kao,T.S. Wei,S.Y. Liu,Y. S. Syu,P.D. Liu, "Development of Active Rehabilitation Device of Hand Joint," Advanced Materials Research Vols, Oct, 2012.
8.	Chia-Chi Sung,Chao-Yang Liu,Hsi-Chuan Huang,Lung-Hao Hu, "A Platinum-Like Behavior Electrocatalyst and Solid Polymer Electrolyte Technique Used on High Concentration of Electrochemical Ozone Water Generation," J Solid State Electrochem (2012), Aug, 2012.
9.	Janpou Nee1,Hsi-Chung Huang, "On the Behavior of Certain Turing System," Journal of Mathematics and System Science 2, Jan, 2012.
10.	W.H. Kao, Y.L. Su, S.H. Yao, H.C. Huang, "Tribological properties of Zr-C:H:Nx% coatings with different amounts of nitrogen addition," Thin Solid Films(2011), Nov, 2011.
11.	Shie-Chen Yang,Tsuo-Fei Mao,Hsi-Chuan Huang,Feng-Che Tsai,Jiuan-Hung Ke, "Surface Polishing of Metal Mold Using Wax-coated Abrasive SiC Particles," Materials Processing Technologies, Oct, 2010.
12.	黃錫泉,王曉媛, "RFID應用於分散式貴重儀器遠端管理系統," 創新與管理, May, 2010.
13.	W.H.Kao, Y.L.Su, S.H.Yao, H.C.Huang, "Optimizing the tribological properties and high-speed drilling performance of a-C:H coatings via nitrogen addition," Surface & Coatings Technology, Jan, 2010.
14.	黃錫泉、黃碇耀、楊竣顯, "模糊邏輯應用於空氣清淨機之自動控制系統研發," , Apr, 2009.
15.	張智為、黃錫泉、王豐政、陳俊明、尤瓊琦, "刮除式電化學除氮機應用在養殖廢水之研究," , Jan, 2009.
16.	shyi-chyuan Hwang, "Removal of nitrogenous sustances by Aspergillus niger in a continuous stirred tank reactor (CSTR) system," , Jan, 2007.
17.	H.C.Huang, "Aspergillus niger完全混合式除銨系統之研究," , Jan, 2005.
18.	蘇一峰、尤瓊琦、陳俊明、黃錫泉, "氧氣錐溶氧傳輸特性之探討," , Jan, 2005.
19.	shyi-chyuan Hwang, chan-shing Lin, I-ming Chen, Jiunn –ming Chen, liang-yu Lu, Dodds, W.K., "Removal of multiple nitrogenous wastes by Aspergillus niger in a continuous fixed-slab reactor.," , Nov, 2004.
20.	蘇一峰，尤瓊琦，陳俊明，黃錫泉, "氧氣錐基礎研究," , Jan, 2004.
21.	童國枝，陳俊明，尤瓊琦，黃錫泉, "循環水草魚卵孵化系統之研究," , Jan, 2003.
22.	黃錫泉，陳俊明，尤瓊琦, "Aspergillus niger對不同氮基質之利用特性研究," , Jan, 2002.

1.	\W.H. Kao, H.C. Huang, S. C. Yang, T. F. Mao, S. H. Yao, "Tribological properties of diamond-like carbon coatings with various tungsten filament currents sliding against AISI 52100 steel ball and Al2O3 ball," 7th China international symposium on tribology, Jan, 2014.
2.	Hsi-Chuan Huang, Feng-Che Tsai, Shie-Chen Yang, Tsuo-Fei Mao, ming-jing Xie, Yan-Sheng Wang, "An automatic gripping system by the visual positioning," International conference on engineering tribology technology, Jan, 2014.
3.	H.C. Huang, C.J. Siao, Y.G. Chen, "The rehabilitation system of finger joints," 2013 13th International conference on control, automation and systems, Jan, 2013.
4.	H.C. Huang, W.H. Kao, T.S. Wei, S.Y. Liu, Y. S. Syu, P.D. Liu, "Development of Active Rehabilitation Device of Hand Joint," 2012製造工程與自動化國際會議, Nov, 2012.
5.	W.H. Kao, Y.L. Su, S.H. Yao, H.C. Huang, M. S. Chen, "The Study of High Speed Micro-drilling Performance and Machining," Advanced Materials Research Vols, Oct, 2012.
6.	Shie-Chen Yang, Hsi-Chuan Huang, Yu-Siang Syu, Jyun-Sian Yang, "Studies of the Influence of Supply Air Vent Arrangement on the Ventilation Performance in a Bathroom," 2011 The Second International Conference on Building Energy and Environment, Aug, 2012.
7.	HUANG HSI-CHUANa,HE YONG-HUIb,LIN FENGb, "THE PORTABLE PRESSURIZED AIR PURIFIER," 5th Asian Particle Technology Symposium, Jul, 2012.
8.	Janpou Nee,Hsi-Chuan Huang, "Solutions Behavior of Fungal Mycelia," conference scientific committee for the Fourth, Mar, 2012.
9.	Huang,Hsi-Chuan; He, Yong-Hu; Lin Feng, "The portable presurized air purifier," 5th Asian particle technology APT, Jan, 2012.
10.	Janpou Nee,Hsi-Chuan Huang, "Solutions behavior of certain biological system," SRP Workshop：Progress in Applied Mathematics, Dec, 2011.
11.	yong-hui He,hsi-chuan Huang, "Fuzzy control applied to the bath room ventilation system," International Conference on, Jul, 2011.
12.	延念澄, "Embeded Control System for Dishes Drier," ICPECC2011香港國際研討會, Mar, 2011.
13.	Hsi-Chuan Huang, Feng-Che Tsai, Tsuo-Fei Mao, "The intelligent embedded control warning system for car reversing," 2011 Third International Conference on Measuring, Jan, 2011.
14.	Hsi-Chuan Huang, Chun-Hsien Yang , Ming-Long Wu, "The Embedded Control System of the Bath Room Odor Free Ventilation System," 4th Asia International Symposium on Mechatronics, Apr, 2010.
15.	Hsi-chuan Huang, Ding-yao Huang, Yu-sheng Chen, "Development of automation production system for α-starch product," , Dec, 2007.

1.	田雲生, 黃錫泉, 徐鈺祥, 陳冠穎, "半結球萵苣培養箱環控系統之研製," 智慧型系統工程應用研討會, Jan, 2013.
2.	高文顯, 黃錫泉, 陳明山, 王嘉賢, "鑽針被覆多層類鑽碳膜之鑽削性能與微孔品質之研究," 第一屆台灣磨潤科技研討會論文集, Jan, 2013.
3.	黃錫泉,楊士震,延念澄,楊清靝, "烘碗機不同進風口位置乾燥效率之研究," 中華民國力學學會第三十六屆全國力學會議, Nov, 2012.
4.	黃錫泉,徐鈺祥,黃謙瀚,黃寶成, "培養箱光源自動調距系統," 2012年農機與生機學術研討會論, Oct, 2012.
5.	黃錫泉,莊宗恩,施富邦, "攜帶型清淨器之無菌供氣," 第七屆智慧生活科技研討會, Jun, 2012.
6.	黃錫泉,徐鈺祥,王俊淵, "家庭式蔬菜培養箱之自動栽種系統," 第七屆智慧生活科技研討會, Jun, 2012.
7.	黃錫泉,楊淑娥,黃俐茹,劉訓鈺,欒家敏, "改良型蒜頭精油萃取系統," 第七屆智慧生活科技研討會, Jun, 2012.
8.	黃錫泉,蕭智謙,楊清靝,林男和, "手部指關節復健機構之研發," 第七屆智慧生活科技研討會, Jun, 2012.
9.	黃錫泉,延念澄,施富邦,楊俊閔, "強制對流式自動烘碗機之研發," The 1st Conference on Applications of Innovation & Invention 2011, Nov, 2011.
10.	黃錫泉,楊清靝,蕭智謙,黃俐茹, "自行車之光源自動控制系統," 2011兩岸機電暨產學合作學術研討會, Nov, 2011.
11.	黃錫泉,延念澄,莊宗恩,徐鈺祥, "水解式臭氧殺菌設備應用於嵌入式烘碗機控制系統," 2011兩岸機電暨產學合作學術研討會, Nov, 2011.
12.	黃錫泉,楊士震,黃鴻源, "智慧型浴室通風系統之通風效能分析," 2011 Symposium on Digital Life Technologies, Jul, 2011.
13.	黃錫泉,黃鴻源,蕭育駿, "多翼式風扇馬達自動預警系統," 2011 Symposium on Digital Life Technologies, Jul, 2011.
14.	巫明隆,延念澄,楊竣閔, "(智慧型浴室通風系統)," 第六屆智慧生活科技研討會, Mar, 2011.
15.	黃錫泉,巫明隆,梁家豪, "感應式點滴控制系統," 2011生物醫學工程科技研討會, Dec, 2010.
16.	黃錫泉,巫明隆,楊清靝,黃俐茹, "水解式臭氧與純氧產生器之研發," 2010智慧型系統工程應用研討會, May, 2010.
17.	黃錫泉,楊竣顯,延念澄, "嵌入式控制系統應用於多功能空氣清淨機之研發," 2010智慧型系統工程應用研討會, May, 2010.
18.	黃錫泉、黃芳裕、何念庭, "空氣彈簧組立機之研發," , May, 2009.
19.	黃錫泉、王曉媛、陳憶宗、楊竣顯、林家安, "機具設備之售後服務及遠端管理系統," , May, 2009.
20.	黃錫泉、王曉媛、陳憶宗、楊竣顯、 黃碇耀, "RFID應用於分散式貴重儀器管理系統," , Mar, 2009.
21.	黃錫泉、陳憶宗、楊竣顯, "漁產品產銷履歷應用系統之研究," , May, 2008.
22.	黃錫泉、詹瑞鵬、詹育琿、詹承洋、黃碇耀, "氣動式多功能自動 醫療床之研發," , Nov, 2007.
23.	黃錫泉、莊國樑、林淑芳、黃鈺婷、莊育菱, "台灣科技化養殖之管理模式探討以文蛤養殖為例," , Mar, 2007.
24.	黃錫泉、Jy S. Wu、欒家敏、林淑芳、莊育菱, "智慧型水文資訊與氣象分析系統," , Oct, 2006.
25.	黃錫泉、黃鈺婷 、黃碇耀, "烏魚子定型機之研發," , May, 2006.
26.	黃錫泉、W. K. Dodds, "溶氧微電極製作與檢測分析," , May, 2006.
27.	王清松、陳俊明、尤瓊琦、黃錫泉, "電化學氧化處理養殖海水之最適電流密度試驗," , Aug, 2003.

1.	黃錫泉, "圍腹式發酵槽," , Apr, 2016.
2.	黃錫泉, "水龍頭水壓及空壓測試機," , Feb, 2016.
3.	黃錫泉、欒家敏, "後幫機之鞋模自動水平定位裝置," , May, 2015.
4.	劉森永、黃錫泉、魏大森、林仲哲、吳宗儒、楊清靝、蕭智謙, "手指關節復健裝置," , Feb, 2015.
5.	毛祚飛,楊士震 ,黃錫泉 ,蘇鈺恆,吳柏彥 ,劉巧蕓, "車內精油薰香器," , Jan, 2015.
6.	黃錫泉、欒家敏, "禽類廢棄物處理裝置," , Jan, 2015.
7.	黃錫泉,黃謙瀚, "水簾式植物培養裝置," , Aug, 2014.
8.	田雲生、張金元、黃錫泉、欒家敏, "輪轉吊盤式立體栽培架," , Feb, 2014.
9.	江金山、吳佩玲、黃錫泉、林男和、張育禎、林建翰, "精油萃取冷卻裝置," , Sep, 2013.
10.	壓力感測奶嘴, "楊素珍、黃錫泉," , Aug, 2013.
11.	楊素珍、黃錫泉, "按摩胸罩改良結構," , Jul, 2013.
12.	彭田、黃錫泉、林英姬, "可重複使用之教學用藥瓶," , Jul, 2013.
13.	蕭慧玲、黃錫泉, "抽痰計量器," , Sep, 2012.
14.	黃錫泉、卓煜貴、吳明城, "杯體蓋合結構改良," , Jun, 2012.
15.	黃錫泉、卓煜貴、吳明城, "杯體蓋合結構," , Mar, 2012.
16.	吳佩玲、江金山、黃慧貞、黃錫泉、方亮彬、陳麗文, "工具刷清潔消毒組," , Nov, 2011.
17.	黃錫泉、楊清靝、蕭智謙, "自行車之光源自動控制系統," , Oct, 2011.
18.	黃錫泉、卓煜貴、鄞清守, "櫃體通風裝置," , Jun, 2011.
19.	毛祚飛、楊士震、黃錫泉、蔡逢哲、許曜顯、王嘉賢, "具調整葉片傾斜角度功能之微調風力發電教具," , Mar, 2011.
20.	卓煜貴、鄞清守、黃錫泉, "室內通風裝置," , Dec, 2010.
21.	吳佩玲、江金山、黃慧貞、黃錫泉、方亮彬、林文雄、陳麗文, "美容師、美髮師造型推車殺菌消毒結構," , Nov, 2010.
22.	吳佩玲、江金山、黃慧貞、黃錫泉、毛祚飛、林文雄、曾憲中, "化妝鏡盒ＬＥＤ燈照明結構," , Nov, 2010.
23.	蕭進德、黃錫泉, "可供栽培植物之水族養殖槽," , Oct, 2010.
24.	卓煜貴、張祐菘、黃錫泉、許承先, "水電解裝置," , Oct, 2010.
25.	卓煜貴、黃錫泉, "環式隔熱把手," , Sep, 2010.
26.	黃錫泉, "智慧型汽車倒車警示系統," , Jun, 2010.
27.	黃錫泉、卓煜貴, "密閉式空氣清淨機," , Jun, 2010.
28.	黃錫泉, "養殖池自動定點水質監控系統," , Jun, 2010.
29.	卓煜貴、黃錫泉、鄞清守, "衛浴空間之智慧型通風系統," , Jun, 2010.
30.	黃錫泉, "空氣彈簧接合裝置," , May, 2010.
31.	江金山、吳佩玲、蔡逢哲、黃錫泉、方亮彬、毛祚飛、陳麗文, "具吸取髮屑及水療SPA功能之行動剪髮洗頭機," , May, 2010.
32.	黃錫泉、張煒華, "點滴感測裝置," , May, 2010.
33.	詹瑞鵬、黃錫泉, "具有舒眠效果之氣動裝置," , May, 2010.
34.	江金山、吳佩玲、蔡逢哲、黃錫泉、方亮彬、毛祚飛、曾憲中, "具吸取髮屑之行動剪髮機," , Apr, 2010.
35.	吳佩玲、江金山、黃秀勤、黃錫泉、毛祚飛、蔡逢哲, "衛生拋棄型按摩手套," , Apr, 2010.
36.	詹瑞鵬、黃錫泉, "以空氣彈簧調整床墊起伏的結構," , Mar, 2010.
37.	江金山、吳佩玲、蔡逢哲、黃錫泉、黃秀勤、毛祚飛、方亮彬, "具水療SPA功能之行動洗頭機," , Mar, 2010.
38.	黃錫泉、宋昀達, "密閉式空氣清淨機（密封式）," , Nov, 2009.
39.	黃錫泉、宋昀達, "Sealed air purifier background of the invention," , Nov, 2009.
40.	黃錫泉, "環保腳踏車免電池警示系統," , Nov, 2009.
41.	黃錫泉, "空氣彈簧組合裝置," , Nov, 2009.
42.	鄭明輝、黃錫泉, "智慧型空氣清淨系統," , Apr, 2009.
43.	黃錫泉, "食材整平裝置," , Feb, 2009.
44.	詹瑞鵬、黃錫泉, "按摩與調整頭部偏擺的頭枕," , Aug, 2008.
45.	詹瑞鵬、黃錫泉, "具拍打按摩效果的按摩椅," , Jul, 2008.
46.	洪惠珠、黃錫泉, "一種活性酵母之製造方法," , Feb, 2007.
47.	陳俊明、尤瓊琦、黃錫泉, "鰻魚分級機," , Nov, 2004.
48.	陳俊明、尤瓊琦、黃錫泉、林榮華, "魚苗自動計數機," , Oct, 2003.
49.	陳獻、黃錫泉、林男和, "養蝦之水質自動監控系統," , Jul, 2002.
50.	黃錫泉、林男和, "自動投餌裝置," , Nov, 2001.

計畫

1. EVA 中/小鞋底粗胚磨粗機之研發 (2016-06 ~ 2017-05)
2. LCM自動控制系統之設計 (2015-11 ~ 2016-06)
3. 鞋底自動磨粗機 (2015-03 ~ 2017-03)
4. 苦茶油榨油機 (2015-01 ~ 2017-06)
5. 後幫機之鞋模自動水平定位控系統 (2014-12 ~ 2015-04)
6. 傳統製造產業輔導轉型創新研發診斷計畫_NC code轉碼技術 (2014-05 ~ 2014-10)
7. 傳統製造產業輔導轉型創新研發診斷計畫_創新鞋型設計開發技術 (2014-05 ~ 2014-10)
8. Calow削皮機迴轉刀盤之重建 (2013-10 ~ 2015-04)
9. 遠距手部復健裝置研發 (2013-06 ~ 2014-05)
10. 全自動裁切倒角機工具機研發計畫 (2013-01 ~ 2013-12)
11. 容積式含水率檢測儀器開發與測試 (2012-08 ~ 2014-07)
12. 挖土機之鏟齒結構改良研發計畫 (2012-07 ~ 2013-04)
13. 牛樟芝子實體量產驗證與系統建置計畫 (2012-02 ~ 2013-05)
14. 風扇蓄電系統開發 (2011-08 ~ 2012-01)
15. 蒜頭精之超臨界二氧化碳萃取技術建立與應用 (2011-08 ~ 2012-02)
16. 薄膜口罩式動力空氣清淨裝置之研發 (2011-08 ~ 2012-07)
17. 智慧型之自動烘碗機控制系統 (2011-07 ~ 2011-12)
18. 浴室通風控制系統改良與測試 (2011-07 ~ 2011-12)
19. 創新切割機構設計與研發 (2011-01 ~ 2011-06)
20. 智慧型浴室通風系統之最適通風效能分析與控制模式建立 (2010-11 ~ 2011-10)
21. 牛樟芝固液態栽培與CO2萃取技術 (2010-07 ~ 2010-12)
22. 煞車導殼繞線機研發 (2010-04 ~ 2010-08)
23. 研發智慧型空氣清淨機與浴室通風系統之嵌入式遠端控制系統 (2010-03 ~ 2010-12)
24. 智慧型空氣清淨系統 (2010-01 ~ 2013-01)
25. 新型貨櫃防鬆器(EZ-Lock)之系統測試與分析 (2010-01 ~ 2010-12)
26. 智慧型空氣清淨機功能與造型重整 (2009-08 ~ 2009-12)
27. 氣動式脈衝按摩椅之研發 (2009-07 ~ 2010-06)
28. 氣動脈衝式按摩椅之研發 (2009-07 ~ 2010-06)
29. 98年度全國技術士技能檢定機電整合丙級術科測試計畫案 (2009-07 ~ 2009-07)
30. 倒車警示燈之研發 (2009-05 ~ 2009-12)
31. 電解式臭氧水機之自動迴授補償控制系統 (2009-04 ~ 2009-09)
32. 高產值食用菌之製備技術建立 (2009-03 ~ 2009-08)
33. 超微細氣泡水飲水機之水解式臭氧與純氧產生器之研發 (2009-03 ~ 2009-08)
34. 農產品培育與副產品製備技術建立 (2009-03 ~ 2009-08)
35. 活酵素味噌之製備技術研發 (2008-12 ~ 2009-08)
36. 高產值食用菌之生物科技製程技術建立與產品行銷（整合型計畫總計畫 (2008-11 ~ 2009-10)
37. 高產值食用菌之生物科技製程技術建立與產品行銷（整合型子計畫1） (2008-11 ~ 2009-10)
38. 空氣彈簧製程改善與性能分析 (2008-10 ~ 2009-04)
39. Air spring 組合機之研發 (2008-03 ~ 2008-12)
40. 水解式臭氧機薄膜分析 (2008-03 ~ 2008-08)
41. RFID系統整合應用於種土雞隻生產與性能追溯管理 (2008-01 ~ 2009-12)
42. 97年度全國技術士技能檢定第三梯次機電整合丙級術科測試計畫案 (2007-12 ~ 2008-05)
43. 多功能空氣清淨設備之可行性研發 (2007-08 ~ 2008-04)
44. 多功能醫療床之研發 (2007-07 ~ 2008-04)
45. 可食用立體魚餌之研發 (2007-05 ~ 2008-04)
46. 網路自動化溶氧監控系統 (2007-05 ~ 2008-04)
47. 氣壓床結構設計與模擬分析 (2007-02 ~ 2007-08)
48. 提昇文蛤漁產品之包裝品質與市場行銷能力 (2006-11 ~ 2008-10)
49. 養殖用溶氧微電極之研發 (2006-08 ~ 2007-07)
50. 烏魚子定型機之研發 (2006-05 ~ 2007-04)
51. 曝氣盤溶氧效率分析 (2006-03 ~ 2007-06)

獲獎榮譽

1. 藍芽技術應用點滴監控系統 (2014-04)
2. 風力發電裝置之葉片自動控制系統 (2013-11)
3. 遠端點滴流量自動監控系統 (2013-03)
4. 自動安全預警腳踏車 (2012-11)
5. 手部多關節機構之研發 (2012-06)
6. 口罩式無菌供氣系統 (2012-05)
7. 手指關節復健機構之研發 (2012-05)
8. 點滴自動監測系統 (2012-05)
9. 自動化植物培養箱 (2012-04)
10. 指關節復健機構之研發 (2012-04)
11. 手掌復健機構之研發 (2012-03)
12. 氣動脈衝式按摩椅 (2011-12)
13. 氣動式舒眠枕 (2011-11)
14. 自行車之光源自動控制系統 (2011-10)
15. 嵌入式烘碗機之控制系統 (2011-10)
16. 自行車之光源自動控制系統2 (2011-10)
17. 按摩床機構設計與應力分析 (2010-12)
18. 衛浴空間之智慧型通風系統 (2010-12)
19. Bath Room Oder Free Ventilation System (2010-12)
20. 工程學院教師評鑑績優教師 (2010-10)
21. 20101高瞻遠大創業競賽 (2010-10)
22. 嵌入式系統應用於無臭式浴室通風之控制 (2010-01)
23. 活酵素味噌之攪拌機研究 (2009-12)
24. GPS應用於行徑路線之軌跡追朔 (2009-12)
25. 水解式臭氧之膜電極研發 (2009-12)
26. 嵌入式多元控制介面應用 (2009-11)
27. 嵌入式多功能空氣清淨機 (2009-11)
28. 98年度創新育成績優獎 (2009-11)
29. 智慧型多功能空氣清淨機之研發 (2008-11)
30. 97年度創新育成績優獎 (2008-04)
31. 獲邀參加100國科會科技創新館「衛浴空間之智慧型通風系統」與「薄膜口罩式動力空氣清淨裝置之研發」兩項展示作品。
32. 獲福建信息職業技術學院專題演講「講題：機電整合之教學技巧與跨領域科研應用」，並獲聘為該院機電工程系兼任教授。
33. 擔任2011年福建省職業院校技能大賽機器人比賽副裁判長。
34. 擔任大陸機械工業出版社出版之「自動化生產線安裝與調試」主審。